Free Cisco 300-730 Test Practice Test Questions Exam Dumps [Q28-Q48]

Share

Free Cisco 300-730 Test Practice Test Questions Exam Dumps

Prepare Top Cisco 300-730 Exam Audio Study Guide Practice Questions Edition


Training will take around 5 days and has the following delivery options:

  • Web-based lessons being moderated by instructors virtually
  • e-Learning which is equivalent to receiving instructions for 5 days in a classroom
  • Classroom experience guided by qualified instructors

 

NEW QUESTION # 28
Refer to the exhibit.

Which type of Cisco VPN is shown for group Cisc012345678?

  • A. GETVPN
  • B. Cisco AnyConnect Client VPN
  • C. DMVPN
  • D. Clientless SSLVPN

Answer: B


NEW QUESTION # 29
A router is being configured for IKEv2 AnyConnect using AnyConnect-EAP. How would the administrator separate profiles for administrators and employees so that authorization differs when they connect?

  • A. Define group-urls on the headend and create two XML profiles to match the administrator and user group urls
  • B. Define key-ids on the headend and create two XML profiles to match the administrator and user key-ids.
  • C. Define group aliases on the headend and have the user pick the appropriate alias when they connect
  • D. Create a certificate map and match on the appropriate certificate fields

Answer: B


NEW QUESTION # 30
Which benefit of FlexVPN is a limitation of DMVPN using IKEv1?

  • A. IKE implementation can install routes in routing table.
  • B. Dynamic routing protocols can be configured.
  • C. NHRP authentication provides enhanced security.
  • D. GRE encapsulation allows for forwarding of non-IP traffic.

Answer: A


NEW QUESTION # 31
A clientless SSLVPN solution is built for 10 employees on a newly installed Cisco ASA. After a couple of days in production, it has been observed that only the first two users to log in each day are able to connect successfully. The remaining users encounter the message "Login failed".
Which action resolves the issue?

  • A. Increase the vpn-simultaneous-logins parameter to a value of more than 2.
  • B. Verify that the users that cannot log in are in the correct AD group with VPN permissions.
  • C. Increase the number or IP addresses available in the VPN pool.
  • D. Allocate additional Cisco AnyConnect Premium licenses to the ASA.

Answer: D


NEW QUESTION # 32
Refer to the exhibit.

An SSL client is connecting to an ASA headend. The session fails with the message "Connection attempt has timed out. Please verify Internet connectivity." Based on how the packet is processed, which phase is causing the failure?

  • A. phase 4: ACCESS-LIST
  • B. phase 3: UN-NAT
  • C. phase 9: rpf-check
  • D. phase 5: NAT

Answer: B


NEW QUESTION # 33
Which technology is used to send multicast traffic over a site-to-site VPN?

  • A. GRE over IPsec on IOS router
  • B. GRE over IPsec on FTD
  • C. IPsec tunnel on FTD
  • D. GRE tunnel on ASA

Answer: B


NEW QUESTION # 34
Under which section must a bookmark or URL list be configured on a Cisco ASA to be available for clientless SSLVPN users?

  • A. tunnel-group (general-attributes)
  • B. webvpn (global configuration)
  • C. webvpn (group-policy)
  • D. tunnel-group (webvpn-attributes)

Answer: B

Explanation:
Section: Remote access VPNs
Explanation/Reference:


NEW QUESTION # 35
Which parameter must match on all routers in a DMVPN Phase 3 cloud?

  • A. EIGRP split-horizon setting
  • B. NHRP network ID
  • C. GRE tunnel key
  • D. tunnel VRF

Answer: C

Explanation:
NHRP network IDs are locally significant and can be different. It makes sense from a deployment and maintenance perspective to use unique network ID numbers (using the ip nhrp network-id command) across all routers in a DMVPN network, but it is not necessary that they be the same. https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-mt/sec-conn-dmvpn-15-mt-book/sec-conn-dmvpn-dmvpn.html


NEW QUESTION # 36
A network engineer must implement an SSLVPN Cisco AnyConnect solution that supports 500 concurrent users, ensures all traffic from the client passes through the ASA, and allows users to access all devices on the inside interface subnet (192.168.0.0/24). Assuming all other configuration is set up appropriately, which configuration implements this solution?

  • A. Option C
  • B. Option D
  • C. Option B
  • D. Option A

Answer: D


NEW QUESTION # 37
An administrator is setting up Cisco AnyConnect on a Cisco ASA with the requirement that AnyConnect automatically establishes a VPN when a company-owned laptop is connected to the internet outside of the corporate network. Which configuration meets these requirements?

  • A. SBL with machine certificate authentication
  • B. TND with machine certificate authentication
  • C. TND with user certificate authentication
  • D. SBL with user certificate authentication

Answer: B

Explanation:
Trusted Network Detection (TND) gives you the ability to have AnyConnect automatically disconnect a VPN connection when the user is inside the corporate network (the trusted network) and start the VPN connection when the user is outside the corporate network (the untrusted network).
https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect41/administrati on/guide/b_AnyConnect_Administrator_Guide_4-1/configure-vpn.html#id_100236


NEW QUESTION # 38
Refer to the exhibit. An IKEv2 site-to-site tunnel between an ASA and a remote peer is not building successfully. What will fix the problem based on the debug output?

  • A. Correct crypto access list on both VPN devices.
  • B. Ensure crypto IPsec policy matches on both VPN devices.
  • C. Specify the peer IP address in the tunnel group name.
  • D. Install the correct certificate to validate the peer.

Answer: A


NEW QUESTION # 39
Which two protocols does DMVPN leverage to build dynamic VPNs to multiple destinations?
(Choose two.)

  • A. NHRP
  • B. mBGP
  • C. GDOI
  • D. mGRE
  • E. IKEv2

Answer: A,D


NEW QUESTION # 40
Refer to the exhibit. Cisco AnyConnect must be set up on a router to allow users to access internal servers 192.168.0.10 and 192.168.0.11.
All other traffic should go out of the client's local NIC.
Which command accomplishes this configuration?

  • A. svc split include acl CCNP
  • B. svc split include 192.168.0.0 255.255.255.0
  • C. svc split exclude 192.168.0.0 255.255.255.0
  • D. svc split exclude acl CCNP

Answer: A


NEW QUESTION # 41
Which technology works with IPsec stateful failover?

  • A. VRRP
  • B. HSRP
  • C. GRE
  • D. GLBR

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2y/12_2yx11/feature/guide/ ft_vpnha.html#wp1122512


NEW QUESTION # 42
Which two types of SSO functionality are available on the Cisco ASA without any external SSO servers? (Choose two.)

  • A. SAML
  • B. NTLM
  • C. HTTP Basic
  • D. OAuth 2.0
  • E. Kerberos

Answer: B,C

Explanation:
The auto-signon command is a single sign-on method for users of clientless SSL VPN sessions. It passes the login credentials (username and password) to internal servers for authentication using NTLM authentication, basic authentication, or both. Multiple auto-signon commands can be entered and are processed according to the input order (early commands take precedence).
https://www.cisco.com/c/en/us/td/docs/security/asa/asa916/configuration/vpn/asa-916-vpn-config/webvpn-configure-policy-groups.html#ID-2439-00001438


NEW QUESTION # 43
Refer to the exhibit.

Which VPN technology is used in the exhibit?

  • A. DVTI
  • B. DMVPN
  • C. GRE
  • D. VTI

Answer: D


NEW QUESTION # 44
What is a characteristic of GET VPN?

  • A. peer-to-peer
  • B. hub-and-spoke
  • C. tunnel-less
  • D. tunneled

Answer: C

Explanation:
Group Encrypted Transport VPN (GET VPN) is a tunnel-less VPN technology designed for securing private MPLS and WAN networks.
Unlike traditional IPsec VPNs that use point-to-point tunnels, GET VPN encrypts traffic end-to- end without creating tunnels, maintaining the original routing path.Key characteristics of GET VPN:
Tunnel-less: It encrypts traffic without encapsulating it in GRE or IPsec tunnels.
Scalable: Suitable for large networks with multiple sites.
Group Encryption Keying: Uses GDOI (Group Domain of Interpretation) to distribute encryption keys to all members.
Preserves QoS and Routing: Since no tunnels are created, original QoS markings and routing decisions remain intact.


NEW QUESTION # 45
An engineer is troubleshooting a new DMVPN setup on a Cisco IOS router. After the show crypto isakmp sa command is issued, a response is returned of "MM_NO_STATE." Why does this failure occur?

  • A. Tunnel protection is not applied to the DMVPN tunnel.
  • B. ESP traffic is being dropped.
  • C. The ISAKMP policy priority values are invalid.
  • D. The Phase 1 policy does not match on both devices.

Answer: D

Explanation:
https://www.cisco.com/c/en/us/support/docs/security/dynamic-multipoint-vpn-dmvpn/111976- dmvpn-troubleshoot-00.html


NEW QUESTION # 46
A network administrator wants to block traffic to a known malware site at https:/www.badsite.com and all subdomains while ensuring no packets from any internal client are sent to that site. Which type of policy must the network administrator use to accomplish this goal?

  • A. Access Control policy with URL filtering
  • B. Prefilter policy
  • C. DNS policy
  • D. SSL policy

Answer: A

Explanation:
Access Control policy with URL filtering. An Access Control policy is a type of policy that allows you to control how traffic is handled on your network based on various criteria, such as source and destination IP addresses, ports, protocols, applications, users, and URLs. URL filtering is a feature that enables you to block or allow traffic based on the URL category or reputation of the website. You can create custom URL objects to specify the exact URLs or domains that you want to block or allow. For example, you can create a URL object for https:/www.badsite.com and set it to block. This will prevent any traffic from reaching that site and any subdomains under it.


NEW QUESTION # 47
Which two parameters help to map a VPN session to a tunnel group without using the tunnel-group list? (Choose two.)

  • A. optimal gateway selection
  • B. AnyConnect client version
  • C. group-url
  • D. group-alias
  • E. certificate map

Answer: C,D

Explanation:
https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/98580-enable-group-dropdown.html


NEW QUESTION # 48
......

Go to 300-730 Questions - Try 300-730 dumps pdf: https://pdfdumps.free4torrent.com/300-730-valid-dumps-torrent.html